| PRODUCT
SPECIFICATIONS |
| PART
1 - GENERAL |
| 1.1 |
Section includes: Resilient playground surfacing poured-in-place
system. |
| 1.2 |
Related work: Playground equipment and resilient playground surfacing
sub base. |
| 1.3 |
Description: Provide all necessary materials, labor, tools and equipment
to perform the work included in the section for the installation
of the poured-in-place resilient playground surfacing. |
| 1.4 |
Quality Assurance - Manufacturer shall have manufactured and installed
playground poured-in-place surfacing systems for a minimum of 10
years and meet current ASTM F-1292-99 Test Criteria. The installation
of the poured-in-place product shall be completed by Manufacturer
Certified Contractors or by direct employees of the Manufacturer's
Installation Division. Manufacturer's detailed installation procedures
shall be submitted to the Architect and made a part of the Bid Specifications.
|
| |
|
| PART
2 - SUBMITTALS |
| 2.1 |
Manufacturer's Product Literature and Specification Data. |
| 2.2 |
ASTM F1292-99 Impact Attenuation Test Certification for the poured-in-place
system to be installed in compliance with the Critical Fall Height
as determined by the Playground Equipment to be installed in conjunction
with the poured-in-place surfacing system. |
| 2.3 |
ASTM E108 Flammability Test. |
| 2.4 |
ASTM E303 Skid Resistant Test. |
| 2.5 |
Statement of Warranty for a minimum five year period with detailed
Warranty Claim requirements of the owner and specific procedures
to be followed by the manufacturer in terms of response and repair
of warranty claims. |
| |
|
| PART
3 - PRODUCTS |
| 3.1 |
Product: SpectraPour® Safety Surfacing or approved equal. |
| 3.2 |
Description: A dual durometer poured-in-place system with a wearing
layer upper membrane and an underlying impact attenuation cushion
layer. The finished surface shall be porous and capable of being
installed at varying thickness to comply with Critical Fall Height
requirements of playground equipment installed in conjunction with
the surface. |
| 3.3 |
Materials: The SpectraPour® surface shall be manufactured from EPDM
and SBR rubber compounds mixed with a 100% MDI based Polyurethane
Resin. Polyurethane contained any TDI shall not be allowed due to
environmental regulations. |
| 3.4 |
Cushion Course shall be a mixture of shredded and a 1-4mm SBR rubber
particles of heterogeneous distribution bonded by a polyurethane
binder applied to 100% of the rubber and installed to a designated
thickness as required by the Consumer Product Safety's Commission's
Guidelines and ASTM F1292-99 Test Criteria. |
| 3.5 |
Wearing Surface shall be a mixture of black EPDM or colored EPDM
1-4 MM granules bonded by a polyurethane binder applied to 100%
of the granules and applied to a minimum thickness of 3/8" over
the cushion layer. Color choice and blend ratios to be of color
selected by the owner. |
| 3.6 |
Finish Texture: Pebble grain. |
| 3.7 |
Color: Selected from Manufacture's Color Chart. Choice by owner
to be determined prior to bid. |
