PRODUCT
SPECIFICATIONS
PART
1 - GENERAL
1.1 Section includes: Resilient playground surfacing poured-in-place system.
1.2 Related work: Playground equipment and resilient playground surfacing sub base.
1.3 Description: Provide all necessary materials, labor, tools and equipment to perform the work included in the section for the installation of the poured-in-place resilient playground surfacing.
1.4 Quality Assurance - Manufacturer shall have manufactured and installed playground poured-in-place surfacing systems for a minimum of 10 years and meet current ASTM F-1292-99 Test Criteria. The installation of the poured-in-place product shall be completed by Manufacturer Certified Contractors or by direct employees of the Manufacturer's Installation Division. Manufacturer's detailed installation procedures shall be submitted to the Architect and made a part of the Bid Specifications.
PART 2 - SUBMITTALS
2.1 Manufacturer's Product Literature and Specification Data.
2.2 ASTM F1292-04 Impact Attenuation Test Certification for the poured-in-place system to be installed in compliance with the Critical Fall Height as determined by the Playground Equipment to be installed in conjunction with the poured-in-place surfacing system.
2.3 ASTM E108 Flammability Test.
2.4 ASTM E303 Skid Resistant Test.
2.5 Statement of Warranty for a minimum five year period with detailed Warranty Claim requirements of the owner and specific procedures to be followed by the manufacturer in terms of response and repair of warranty claims.
PART 3 - PRODUCTS
3.1 Product: SpectraPour Safety Surfacing or approved equal.
3.2 Description: A dual durometer poured-in-place system with a wearing layer upper membrane and an underlying impact attenuation cushion layer. The finished surface shall be porous and capable of being installed at varying thickness to comply with Critical Fall Height requirements of playground equipment installed in conjunction with the surface.
3.3 Materials: The SpectraPour surface shall be manufactured from EPDM and SBR rubber compounds mixed with a 100% MDI based Polyurethane Resin. Polyurethane contained any TDI shall not be allowed due to environmental regulations.
3.4 Cushion Course shall be a mixture of shredded and a 1-4mm SBR rubber particles of heterogeneous distribution bonded by a polyurethane binder applied to 100% of the rubber and installed to a designated thickness as required by the Consumer Product Safety's Commission's Guidelines and ASTM F1292-04 Test Criteria.
3.5 Wearing Surface shall be a mixture of black EPDM or colored EPDM 1-4 MM granules bonded by a polyurethane binder applied to 100% of the granules and applied to a minimum thickness of 3/8" over the cushion layer. Color choice and blend ratios to be of color selected by the owner.
3.6 Finish Texture: Pebble grain.
3.7 Color: Selected from Manufacture's Color Chart. Choice by owner to be determined prior to bid.
