PART 1 - GENERAL
1.1 Section includes: Resilient playground surfacing tile system.
1.2 Related work: Playground equipment and resilient playground surfacing sub base.
1.3 Description: Provide all necessary materials, labor, tools, and equipment to perform the work included in the section for the installation of the tile resilient playground surfacing.
1.4 Quality Assurance: The installation of the tile product shall be completed by Manufacturer Certified Contractors or by direct employees of the Manufacturer's Installation Division. Manufacturer's detailed installation procedures shall be submitted to the Architect and made a part of the Bid Specifications.
PART 2 - SUBMITTALS
2.1 Manufacturer's Product Literature and Specification Data.
2.2 ASTM F1292-04 Impact Attenuation Test Certification for the tile product to be installed in compliance with the Critical Fall Height as determined by the Playground Equipment to be installed over the tiles.
2.3 ASTM E303 Skid Resistant Test.
2.4 ASTM E108 Flammability Test.
2.5 Statement of Warranty for a minimum five year period with detailed Warranty Claim requirements of the owner and specific procedures to be followed by the manufacturer in terms of response and repair of warranty claims.
PART 3 - PRODUCTS
3.1 Product: SpectraBound™ Tile or approved equal.
3.2 Description: An amalgam of recycled rubber crumb in a polyurethane binder molded into 2' x 2' tiles. Each tile shall have a solid upper horizontal surface and an engineered understructure of circular or square pillars. The tiles are installed with a single part adhesive.
3.3 Materials: The tiles shall be manufactured from recycled rubber crumb compounds vulcanized and molded at high pressure and temperature. All components of the tile system are certified to be manufactured and produced in the United States of America. 100% of the rubber crumb shall be derived from recycled tires. A granular EPDM top surface is optional.
3.4 The thickness is 2.50", 3.50" or 4.00" in 2' x 2' center tiles. Edge borders, inside and outside corners, ADA ramps & aprons are available. The specified thickness shall be determined by the Critical Fall Height requirements of the playground equipment, the Consumer Product Safety Commission's Guidelines for Public Playgrounds and ASTM F1292-04 test criteria.
3.5 Finish Texture: Pebble grain.
3.6 Colors: Red, Black, Green, Blue or special mix (minimum 2,500 square feet). Optional EPDM top color. Choice by owner to be determined prior to bid.
